Instruction Manual

10
User Instructions Continued
Manual control panel
200798_1
Use the ON / OFF switch to power on the heater (set it to standby mode).
In standby mode, the heater can be operated either manually by the switches located behind the door
or by the supplied remote control.
Heater powered off
Heater powered on, set to standby mode
-
Press to switch the flame effect ON
/
OFF
-
Press and hold to toggle between
5
different flame brightness levels
-
Press once to activate low level
heating(1000W)
-
Press twice to activate high level
heating(2000W)
-
Press three times to switch off heating
-
Press to toggle between 7 different fuel
bed effect colours
BACKLIGHT
Main
Power
Switch
Appliance Control
Panel