Manual

Seite 31 von 38
Dry Mode
In this mode, the unit runs independently of the humidity in the room.
No humidity is shown on the display in this mode and the fan runs at high
power by default.
Drainage
When using the water tank
When the water tank is full, the appliance switches off automatically and
beeps to indicate that the water tank is full. The tank full indicator lights up.
The dehumidifier only continues to run after the water tank has been emptied.
Note: Check in the water tank that the float is in the correct position. Do
not remove the float and make sure that it can rotate freely. If the float is
removed, the appliance will not recognise when the water tank is full.
.Grip each side of the bucket and pull
to remove the bucket from the
dehumidifier, and remove pour the
water.
.Gently Re-insert the bucket, restart it.