Specifications

PRODUCT INFORMATION
Key Features & Specifications
2 Introduction Edition 1.02 DVI Converters: Installation & Operation Guide
• RGB-DVI Converter converts any analog RGB signal to DVI. This converter is
controlled and integrates seamlessly with Black Diamond Video digital video processing
equipment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
KEY FEATURES & SPECIFICATIONS
Features and specifications include the following:
VIDEO INPUT
• The SD-DVI Converter accepts any standard-definition analog signal (NTSC, PAL,
SECAM). Connectors: 3 BNCs: Composite Video, S-Luma, S-Chroma; Y,Cb,Cr.
• The SDI-DVI Converter accepts any serial digital interface signal (SDI). Connector: 75
Ohm BNC input connector; DVI-D, 75 Ohm BNC output connector for loop-through.
• The RGB-DVI Converter accepts any analog RGB signal. Connector: DB15 RGB.
VIDEO OUTPUT
• Single-link DVI. Connector: DVI Female.
CONTROL
• RS-232 serial control of the of the RBG-DVI and SD-DVI Converters. Connector: RJ11.
An RJ11 to DB9 female serial cable is included with all converters.
• Manual control of the RBG-DVI and SD-DVI Converters using external mode setting
and selection buttons.
POWER
• Converters are equipped with a +5V AC/DC adapter.
DIMENSIONS
• 4.6” length x 2.69” width x 1.07” height.