Specifications

USING THE CONTROL BUTTONS
Selecting Adjustment Modes
12 Operation Edition 1.01 DVI Converters - Installation & Operation Guide
ADJUSTMENT MODES
You can use the control buttons to modify various settings on the Externally-Powered
Converters. The buttons are used to enter the different adjustment modes, such as Modulus
and Horz. Position for the RGB-DVI Converter and Saturation and Contrast for the SD-DVI
Converter, and make setting changes.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SELECTING ADJUSTMENT MODES
The adjustment modes and how to select them are listed in the following table. For more
information about the adjustment modes, see “RGB-DVI Converter Adjustment Modes” on
page 13 and “SD-DVI Converter Adjustment Modes” on page 14.
To Select an Adjustment Mode
• To enter an adjustment mode that allows you to modify one of the device settings, hold
one or more buttons down for three seconds.
When the device is in the new setting mode, the LED blink pattern and/or color changes.
For example, if you want to change the input modulus on an RGB to DVI converter unit,
press and hold the Down (
−) button until the LED blink pattern changed to a rapid red
Press and Hold 3
Seconds to Enter
Mode
Adjustment Mode:
RGB-DVI Converter
Adjustment Mode:
SD-DVI Converter LED pattern/color
Auto
Increment &
Decrement?
a
a. For more information on Auto Increment & Decrement, see “Auto Increment & Decrement” on page 16.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
−
Modulus Brightness Rapid Red blink Yes
+
Phase Contrast Rapid Green blink Yes for SD
− and +
Test Pattern Input Format
Steady Green
b
b. For the SD-DVI Converter, the LED pattern/color is Steady Green if the unit is in AutoSense mode. However, depending on the Input Format
setting (see below), the LED is Steady Green but may flicker several times every 3-4 seconds.
No
Menu and −
Horiz. Position Saturation Red, Red, Green Yes for SD
Menu and +
Vert. Position Hue Green, Green, Red Yes for SD
Menu and + and −
Test Pattern Rotate N/A Steady Green No
Menu
Restore Factory
Defaults
Restore Factory
Defaults
Steady Red
c
c. The Restore Factory Defaults mode is special, but begins with the LED pattern and color in Steady Red mode. See “Restoring Factory Defaults”
on page 15.
No