Instruction manual

HORIZONTAL RIGHT CONVERSION OF UNITS WITH A-COIL
1. Remove blower and coil access panels. (See Fig. 5.)
2. Remove clip securing fitting panel to condensate pan. Remove fitting panel.
3. Remove 2 snap-in shipping clips securing A-coil in unit.
4. Remove coil assembly.
5. Remove metal horizontal drain pan from coil assembly.
6. Remove horizontal drain pan support bracket from coil support rail and reinstall to the opposite side of the coil support rail.
Fig. 4—Conversion for Horizontal Right Applications Using a Slope Coil
A90174
COIL MOUNTING
SCREW
BLOWER
ASSEMBLY
COIL SUPPORT
RAIL
COIL SUPPORT
RAIL
PRIMARY
CONDENSATE
DRAIN
REFRIGERANT
CONNECTIONS
SECONDARY
CONDENSATE
DRAIN
Fig. 5—Conversion for Horizontal Right Applications Using A-Coil
A91119
COIL
SUPPORT
RAIL
COIL
BRACKET
DRAIN PAN
SUPPORT
BRACKET
COIL
SUPPORT
RAIL
COIL
BRACKET
METAL HORIZONTAL
DRAIN PAN
SECONDARY
CONDENSATE
DRAIN
PRIMARY
CONDENSATE
DRAIN
REFRIGERANT
CONNECTIONS
AIR SEAL
ASSEMBLY
A
B
C
A
B
C
HORIZONTAL
RIGHT
APPLICATION
FACTORY SHIPPED
HORIZONTAL
LEFT APPLICATION
—4—