ATT E N T ION : ® SEQUEL OFFICE PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. Sequel Corner 6019 Assembly and Placement Information CORNER BDIUSA.
desk and return
features Thanks for purchasing the Sequel System. Before you begin setting up the Sequel System Components, it is imperative that you read the Consumer Considerations section on the next page.
Consumer Considerations Placement Once the Sequel System is fully assembled, it cannot be moved. Make all positioning adjustments prior to final assembly. Plan your space. Forethought is essential in determining the placement of each component. Using a measuring tape, determine how much floor space each unit will require. A cardboard template has been provided in order to help aid this process. Get someone to help you.
This page outlines two scenarios: Scenario 1 If cabinet is NOT blocking an AC power outlet, it may be positioned close to the wall. Power Consumer Considerations Power & Placement Top View Scenario 2 If cabinet is going to block an AC power outlet, position cabinet approximately 3” from wall. Low profile extension plugs may be used to reduce the amount of space required in this application.
step 1 Corner Desk Model 6019 Your SEQUEL® 6019 Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. Placement and Maintenance . SEQUEL® 6019 Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. . K K Unpack and identify the components. The assembly workspace should be a non-marring surface such as carpet.
Plan View step 2 G G Template Position the Template (G) in the desired location where the corner desk will be positioned, followed by the Sequel cabinets. Align the side of the cabinet with the outside edge of the template. NOTE: Cabinets’ top glass are not installed.
step 3 Mx6 Nx6 Wire Management (Optional) For the purpose of wire management, use Plastic Clip (N) to install Velcro Straps (M) to outside perimeter of Desk Frame Assembly (H).
step 4 A Cx4 Attach Leg to Desk Frame While the second person holds the desk frame on its side position, attach Corner Leg (J) to the underside of Desk Frame Assembly (H) using the Hex Wrench (A) and Machine Screws (C).
step 5 A Dx4 Attach Desk Frame to Cabinets With the help of another person, carefully lower Desk Frame Assembly (H) onto the adjacent cabinets (Sequel Models 6014, 6015, 6016, or 6017). Adjust frame so that the holes are aligned with the threaded inserts on top of the cabinets. Once holes are aligned, install Flat Head Screws (D) using Hex Wrench (A).
step 6 Bumpers & Template Install Rubber Stem Bumpers (E). At this time, the cardboard template may be removed.
step 7 A Fx6 Install Glass With the help of another person, carefully lower the Glass Top (K) onto the frame. Register the steel discs on underside of glass into the holes on the frame; then attach the glass using Machine Screws (F) and Allen Wrench (A).
CAUTION: When setting up multiple workstations, leave at least 1" between each station. Failure to do so may result in damage to tempered glass work surfaces. step 8 Plan View 1" Install Glass Carefully lower the glass panel onto the Sequel Cabinet (Refer to individual cabinet instructions).
step 9 step 8 Magnets Located inside the Corner Leg (I) are 4 Magnets (O) that may be peeled and adhered to the rear side of a power strip (not included). Leveler If needed, adjust leveler on Corner Leg using 3mm Hex Wrench (B).
step 9 step 10 Corner Leg Cover Upon completion of wire management, magnetically attach the Corner Leg Cover (J) to the front of the Corner Leg (I).
BDIUSA.COM 16 Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. “Sequel” and BDI are trademarks of Becker Designed, Inc. All Rights reserved. ©2011, BDI Made in Taiwan.
