Assembly Instructions

a s s e m b l y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

I x 3

G x 4

H x 2

Step 3

Install Handles.

Carefully turn pedestal upright so that it rests evenly on all

installed casters, then install one Drawer Pull (H) per drawer

using the 5/32” x 22mm Phillips Screw(G) and a Phillips

Screwdriver.

Step 4

Install Glass Top

Carefully place Glass Top (J) on pedestal’s top surface,

aligning the pre-installed pucks over the corresponding

mounting point on the pedestal. Attach Glass Top (J) by

opening drawer and fastening from underside (inside

drawer) using three (3) 1/4”-20 x 15mm Screws (I) with

provided Allen Wrench (A).

NOTE: Glass Top (J) fastens at three (3) points only---two

(2) near front edge and one (1) at center. Pucks near rear

edge do not accept screws and merely rest in place.

DO NOT OVER-TIGHTEN.

Step 5

File Folders

Users who wish to use legal-length files may install provided

Legal File Folder Stretchers (K) by dropping into place near

front and back of file drawers.