Assembly Instructions

1.
2.
SEQUEL
6003 Compact Desk
ASSEMBLY INSTRUCTIONS
5 BDIUSA.COM [e-mail]
Step 8 (optional)
Attach Magnets to AC power strip/surge protector
Remove Adhesive Magnets (F) from the Upper
Horizontal Beam (K).
Peel film from side of the Adhesive Magnets (F) and
attach to clean, dry back side of AC power strip (not
included). Cleaning of power strip surface with
rubbing alcohol will ensure best adhesive bond.
CAUTION: UNPLUG POWER STRIP
FROM POWER SOURCE BEFORE CLEANING
Step 9 (optional)
Attach Power Strip / Surge Protector
Attach AC power strip /surge protector to inside of Upper Horizontal
Beam (K)
as shown in illustration below.
Use the slot holes provided to run all wires to and from the desk. Keep
all wires inside Upper
Horizontal Beam (K) to allow proper attachment
of
Front Kick Panel (N) and/or optional Back Panel (O).
Adhesive Magnet (F)
Adhesive Magnet (F)
Upper Horizontal Beam (K)