Assembly Instructions

7
a s s e m b l y i n s t R u c t i o n s
b d i u s a .c o m c u s t o m e R s e R v i c e @b d i u s a .c o m
Step 7
Place Sequel Return in desired location. Once all of the electrical wires are
routed, install Kick Panel (D) as shown above. The rear side of panel has
magnets that will hold the panel in place. Note: The Sequel Return is designed
to permit placement in front of an electrical outlet for easier wiring access.
Optional Step
If return is located in the middle of a room, the optional 6009 Back Panel (C)
is available for purchase to conceal wire management. Please contact BDI
Customer Service at [e-mail] or 800-428-2881
D
C