SEQUEL® 20 6159 DRAWER FOR LIFT DESK 6151/6152 INSTRUCTION MANUAL LET’S GET STARTED.
Congratulations on the purchase of your Sequel 20 Drawer 6159 from BDI. Your desk has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information that will ensure that you get the most out of your desk. Please save it for future reference. Your Sequel 20 Office furniture is designed for indoor use on level floors. It has been engineered for easy assembly. Please follow these directions carefully to prevent any damage.
HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. Do not use power tools for assembly of this product. For all other concerns, please contact your BDI retailer.
ASSEMBLY STEP 1. ATTACH DRAWER—OPTION 1 Attach the (A2) Drawer Body by inserting 4 (H10) Screws through the holes on (C11L) and (C11R) Mounting Blocks and thread them into the 4 inserts on the bottom of your Sequel Desk 6151/6152 using the (T1) Hex Wrench. PART/DESCRIPTION QTY T1-HEX WRENCH 1 H10-SCREW 4 H10 A2 C11L C11R H10 H10 H10 C11R H10 A2 C11L 4 | BDIUSA.
2 PERSON TASK STEP 1. ATTACH DRAWER—OPTION 2 ASSEMBLY IF YOUR DESK IS ALREADY FULLY ASSEMBLED If your desk is already upright, install the drawer as follows. This requires 2 people. One person holds the (A2) Drawer under the desk. The other person inserts (H10) Screws into the holes in the side (C11L) and (C11R) Mounting Blocks using the (T1) Hex Wrench and threads them into the inserts under the desk. Start all 4 screws before fully tightening.
CARE & MAINTENANCE GLASS Glass surface is maintained using household glass cleaner and a paper towel or cloth. SATIN-ETCHED GLASS This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available at any grocery store or home improvement center.
WARRANTY BDI warrants to the original purchaser that for the below stated warranty term, BDI will repair or replace any product, part, or component covered by this warranty which fails under normal use as a result of a defect in material or workmanship. BDI will repair or replace the aforementioned product, part or component with a comparable product, part or component. The decision to repair or replace will be at BDI’s sole discretion.
These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2020, BDI | V.05.28.2020 Made in Vietnam.
