Instruction Manual

6 | BDIUSA.COM SEQUEL 20 6151 & 6152
Lay (A1) Main Panel upside down on a soft
surface (carpet). Attach (C1) Keypad on the
desired side (choose left or right) with 2 (H2)
Short Wood Screws and a Phillips Screwdriver.
IMPORTANT! Orient the (C2) Control Module
so that the keypad cord socket (labeled HS) is
facing the keypad side and secure between the
2 steel rails with 2 (H1) Long Wood Screws as
shown. Route the keypad cord into the groove
in the panel and through the hole in the metal
frame. Attach 2 (H3) Cord Wraps (Kleet) using
(H2) Short Wood Screws.
STEP 1. INSTALL CONTROL MODULE AND KEYPADASSEMBLY
PART/DESCRIPTION QTY
H1-WOOD SCREW 2
H2-WOOD SCREW 6
H3-CORD WRAP 2
NOT INCLUDED
Phillips Screwdriver
1
Left hand
side
Right hand
side
Route cord
through hole in
metal frame
Choose
Groove for
keypad cord
C1 C1
H3
H2
C1
H2
A1
C2
H1
H1