Instruction Manual

18 | BDIUSA.COM SEQUEL 20 6151 & 6152
CAUTION!
nMake sure there are no obstacles under or over the path of the desk.
nMake sure the desk top is not touching any walls.
nMake sure all the cords are long enough to reach lowest and highest desk positions.
IMPORTANT: YOU MUST RESET THE DESK PRIOR TO USE.
RESET PROCEDURE
1. Press and hold the DOWN button on the keypad until the desk reaches its lowest height.
2. Release the DOWN button.
3. Press and hold the DOWN button again until the LED display reads “RST”.
4. Release the DOWN button.
5. Press and hold the DOWN button again until the desk lowers a little bit more, slightly rises and
stops.
6. Release the DOWN button. Your desk is now ready for use.
USER MANUAL
“Reset”
looks like this
Up Down Memory
!!
!!