Instruction Manual

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
With help from another person, carefully lift the
cabinet onto its base. Place (C5) Glass Top Panel
into position on top of the (C1) Cabinet. Align all
edges. The glass edge should be offset 1.5mm from
the side of the cabinet on all 4 sides.
PART/DESCRIPTION QTY
H2-Screw 6
NOT INCLUDED
Phillips Screwdriver
1
ASSEMBLY
ASSEMBLY
STEP 2. PLACE GLASS TOP
STEP 3. ATTACH DRAWER PULLS
2 PERSON TASK
1.5 mm
Open a drawer and connect a (C3) Drawer Pull
using 2 (H2) Screws. Tighten with a Phillips
Screwdriver (not included). Install the other
2 (C3) Drawer Pulls one at a time.
C3
C3
H2
C3
C5
C1