Instruction Manual

8 | BDIUSA.COM SEQUEL 20 6112
The return may be attached either to the left or
right of the center drawer (right side shown
below). Partially thread 1 (H3) Screw into the
middle insert leaving it extended out 1/4"
(6mm) to allow (C3) Connector Plate to slide
into the space between the screw head and
bottom of the desk.
STEP 4. INSTALL SCREW FOR CONNECTOR PLATEASSEMBLY
PART/DESCRIPTION QTY
H3-SCREW 1
1/4" (6mm) gap
H3
H3