Instruction Manual

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
On a soft surface such as a carpet, position (C2) Right Leg Frame as shown and hook (C3) Drawer
Assembly Frame onto the partially threaded screws on the top of (C2) Right Leg Frame. Slide the
frame down so that the screws go into the keyhole slot.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 2
ASSEMBLY
STEP 3. INSTALL DRAWER ASSEMBLY FRAME
Hook onto partially
threaded screw head
Wood facia
facing thinner
section of
front leg
C2
C3
C3
Insert (H1) Screws into the lower holes and
partially tighten with (T1) Hex Wrench.
H1
H1 H1
C2