Instruction Manual

10 | BDIUSA.COM SEQUEL 20 6101 & 6103

Lift and hook the (C5) Upper Horizontal Frame

onto the partially threaded screws as shown.

Insert (H1) Screws into the lower holes and

partially tighten with (T1) Hex Wrench.

Including previous steps, fully tighten all screws!

Install the (C6) Wire Tray as shown by inserting the 2 metal tabs into the 2 slots on the (C5) Upper

Horizontal Frame.

STEP 6. INSTALL UPPER HORIZONTAL FRAME

STEP 7. INSTALL WIRE TRAY

ASSEMBLY

Slot

Ta b

PART/DESCRIPTION QTY

T1-HEX WRENCH 1

H1-SCREW 2

C1/C2