Installation & Assembly

bdiusa.com
[e-mail]
OCTAVE 8377/8379
3 & 4 DOOR CONSOLE
4
Step 6 - The 2 Back Panels C5 are removable and can slide towards the middle. To remove lift up and pull the
bottom edge out of its groove. To re-install, put the top edge of the back panel into the top groove, then drop
the bottom edge into the bottom groove.
Your Octave Console comes with 2 KLEET Cord Wraps H4. Install into the pre-drilled holes as shown using 4
wood screws H2 and Phillips screwdriver T1.
2
C5
C5
H4 Cord Wrap
H4
H4
Step 5 Quad Only - Adjustable Shelves
The shelf pins located inside all three cabinet spaces may be repositioned using Screwdriver T1, allowing you
to raise or lower Middle and Side Shelves C3 and C4 to the desired level.
C3
C4
C4
T1
1
H2 Wood screw
x 4
T1 Phillips
Screwdriver x 1