Instruction Manual

bdiusa.com
[e-mail]
COSMO 5729
CONSOLE
3
down
Reposition shelf pins
(if needed)
Level the cabinet
(if needed)
Step 4 Drawer liner Installation
Place one drawer liner C5 into each drawer.
Step 5 Cabinet Leveling
Check to make sure your Cosmo Console is level. Levelers are located underneath each leg and can be
dialed up or down to level the unit if necessary (see below).
Step 6 Shelf Positioning
The shelves may be positioned at any of the available locations corresponding with threaded inserts inside
the cabinet by moving the shelf pins. Use a Phillips driver to loosen, reposition, and re-tighten the shelf
pins.
C5 Drawer liner x 2