Instruction Manual

bdiusa.com
[e-mail]
COSMO 5729
CONSOLE
2
Step 2 - Base Assembly
Position the front and back base frames C1 and C2 as shown. Position the connector tubes C3 as
shown (no holes should be visible on the outside ends). Slide the metal tabs into the ends of the connector
tubes. Attach base frames to connector tubes using 6 screws H1. Tighten with hex driver T1.
Step 3 - Base Attachment
Make sure the packing material bracing the 2 inner shelves is still in place before rotating the cabinet. With
help from another person, carefully position cabinet A1 on its back. Attach the base as shown using 4
screws H1 (at the corners) and 2 screws H2 through the middle connector tube. Tighten all screws
using hex driver T1.
2 Person Ta sk
H1
A1
T1 H1 x 6
Metal tabs
C1
C3
C3
C2
H1
H1
H1
H2
H2 x 2
H1 x4
H1
C3
No holes
here