Manual

bdiusa.com
[e-mail]
SOLA 6817
MULTIFUNCTION CABINET
2
Step 3 - Adjust shelf if needed
The shelf position can be adjusted by unscrewing the 4 shelf pins and moving them up or down to the desired
level.
Step 2 - Lay Cabinet on its back side. Attach 4 swivel locking casters C8 to the corners of the cabinet
bottom panel using 16 screws H5 and tighten with a Phillips screwdriver. Attach small swivel caster C7 to
the drawer block as shown using 4 screws H5.
Adjustable shelf
Pull-out shelf
for printer
C7
C7
C8
H5
C8
C8
C8
C8
drawer block