Item Brochure

carefusion.com
Straight-through fluid path
The SmartSite
®
valve has a straight-through fluid path equivalent to an 18g needle/
catheter, which helps reduce the risk of hemolysis. The AABB recommends at least
a 20g needle/catheter when infusing blood. A straight-through fluid path helps
improve the ability to flush.
Standardization throughout the hospital
The SmartSite
®
valve allows you to standardize on one needle-free technology
hospital-wide:
• Models 2000E, 20019E, 20039E, 20041E and 10011253 are labeled to
be used with low-pressure power injectors up to 325 psi and maximum
flow rate of 10 mL/second
• Metal-free and MRI-compatible
• DEHP-free, lipid-resistant and highly-chemical compatible
© 2010 CareFusion Corporation or one of its subsidiaries. All rights reserved.
Smartsite is a trademark or registered trademark of CareFusion Corporation or
one of its subsidiaries. IV1019 (0610/2500)
CareFusion
San Diego, CA
Normally closed valve
When the SmartSite
®
valve is activated, there is an airtight seal between
the male luer and the top of the blue piston of the SmartSite
®
valve. A seal
is made between the tip of the male luer and valve fluid path before the valve
opens. This helps ensure there is no air entrainment or fluid leakage when the
valve is activated.
Smooth, swabbable surface
The SmartSite
®
valve has a smooth top that is easy to swab.
IV connectors with a smooth, swabbable design can be effectively
swabbed with a standard, acceptable disinfection practice.