Datasheet

Polypropylene is one of the most preferred thermoplastics in different industries,

especially in the automotive sector. However, high level of reinforcement was always

-













that couldn’t be combined before: printing stiffer parts with UV resistance is now



PPGF30

PAGE 1
PPGF30 Polypropylene is one of the most preferred thermoplastics in different industries, especially in the automotive sector. However, high level of reinforcement was always a problem in filament making. PP GF30 contains special glass fibers that are designed for filament making and 3D printing. This will ensure the printed objects are functionally working, under certain temperature and mechanical loads.
PAGE 2
PPGF30 - Technical information including: GUIDELINE FOR PRINT SETTINGS Nozzle temperature 240 ± 10 °C Bed temperature 30 ± 10 °C Bed modification Fiber reinforced PP strapping tape (e.g. Scotch Extreme) Active cooling fan 50% Layer height ≥ 0.2 Shell thickness 1.2mm Print speed 30 – 80 mm/s Additional information Hardened or Ruby nozzle, diameter ≥ 0.6 recommended Settings are based on a 0.