Data Sheet

Our PA is specially developed for FFF printing. It is based on BASF´s polyamide por-

tfolio known as Ultramid®. The lament has unique mechanical properties

due to its chemical structure. This makes it suitable for a wide range of applications

working within a larger temperature range. Ultramid® is noted for its high mecha-

nical strength, stiffness and thermal stability. In addition, Ultramid® offers good

toughness at low temperatures. Owing to its excellent properties, this material has

become indispensable in almost all sectors of engineering. It can be used for a wide

range of different components and machine elements, such as a highgrade electri-

cal insulation material.

Ultrafuse PA is the translation of BASF´s Ultramid® to 3D printing space. It is based

on copolyamide 6/66 grade of intermediate viscosity. With Ultrafuse PA, it is possible

to print semi- exible thin parts, however, it is very stiff in higher thicknesses.

PAGE 1
PA Our PA is specially developed for FFF printing. It is based on BASF´s polyamide portfolio known as Ultramid®. The filament has unique mechanical properties due to its chemical structure. This makes it suitable for a wide range of applications working within a larger temperature range. Ultramid® is noted for its high mechanical strength, stiffness and thermal stability. In addition, Ultramid® offers good toughness at low temperatures.
PAGE 2
PA - Technical information including: General Properties Standard Printed Part Density (dry) 1115 kg/m3 / 69.6 lb/ft3 ISO 1183-1 Printed Part Density (conditioned) 1050 kg/m3 / 65.5 lb/ft3 ISO 1183-1 Thermal Properties Standard HDT at 1.8 MPa (dry) 6v5 °C / 149 °F ISO 75-2 HDT at 0.