Data Sheet

Innol3D PP is high performance thermoplastic with low density, high elasticity and

a high resistance to fatigue. The mechanical properties of make it an ideal material

for 3D-printing applications which have to endure high stress or strain.

PP is one the most used materials in the world due to its versatility and ability to

engineer light weight tough parts. With this PP lament Innol3D enables these so-

lutions to be available professional 3D-printing. To provide users with valuable infor-

mation we have collected data regarding the mechanical properties of the printed

material according to the ISO standards.

PAGE 1
PP Innofil3D PP is high performance thermoplastic with low density, high elasticity and a high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications which have to endure high stress or strain. PP is one the most used materials in the world due to its versatility and ability to engineer light weight tough parts. With this PP filament Innofil3D enables these solutions to be available professional 3D-printing.
PAGE 2
PP - Technical information including: General Properties Printed Part Density Standard 900 kg/m3 / 56.2 lb/ft3 Thermal Properties ISO 1183-1 Standard Melting Temperature 141 °C / 286 °F ISO 11357-3 Melt Volume Rate 7.4 cm3/10 min / 0.5 in3/10 min (230 °C, 2.16 kg) ISO 1133 Mechanical Properties Print direction Standard XY XZ ZX Tensile strength ISO 527 11.9 MPa / 1.7 ksi - 8.9 MPa / 1.3 ksi Elongation at Break ISO 527 >200 % - 3.