Data Sheet

Description

PET-G (Polyethylene terephthalate glycol-modied) is a globally used copolyester,

from plastic water bottles to cloth bers and it is 100% recyclable.

As a technical material, PET-G provides good mechanical properties and

improved chemical and thermal behaviours than PLA but with similar ease of use.

Properties

• Outstanding chemical resistance

• Great dimensional stability and toughness

• Good glossy surface quality

• Good abrasion resistance

• High humidity resistance

• Operating temp. up to 70°C

• Low rate of ultrane particles (UFP) and volatile organic compounds (VOC)

• Compatible with PVA supports

Recomendations

Plastics absorb moisture from the air, it is recommended to keep the PET-G

spools in a box or airtight container with desiccant to keep them dry.

For a better print quality use an enclosure.

PET-G emits low levels of gasses and particles when printed. We recommend

printing it in a well-ventilated area.

PET-G

PAGE 1
PET-G Description PET-G (Polyethylene terephthalate glycol-modified) is a globally used copolyester, from plastic water bottles to cloth fibers and it is 100% recyclable. As a technical material, PET-G provides good mechanical properties and improved chemical and thermal behaviours than PLA but with similar ease of use.
PAGE 2
PET-G - Technical information including: Mechanical properties Typical valueT MFR 190°C/2,16 kg6 est method Diameter Ø 2.85 mm .4 gr/10 min ISO 1133 0.4 Mpa ISO 527 750 g Strain at yield5 .9 % ISO 527 1.27 g/cc Strain at break 22.