Data Sheet

PET-G - Technical information including:
Mechanical properties
Typical valueT est method
MFR 190°C/2,16 kg6 .4 gr/10 min ISO 1133
Tensile strength at yield5 0.4 Mpa ISO 527
Strain at yield5 .9 % ISO 527
Strain at break 22.7 %I SO 527
Tensile Modulus 2020 MPa ISO 527
Flexural modulus 2050 Mpa ISO 178
Flexural strength 69 MPa ISO 178
Diameter Ø 2.85 mm
Max roundness deviation
750 g
1.27 g/cc
8,1 kJ/m ISO 179
Rockwell Hardness1 05 ASTM D785
Moisture absorption 1104 ppm ISO 62
Thermal properties
Typical valueT est method
70 °CA STM 648
Transparency 90 % ASTM D1003
Printing settings
Extruder temperature 235 °C - 250 °C
Bed temperature8 0 °C
Speed 25-50 mm/s
Retraction speed 60 mm/s
Retraction distance 5 mm
Cooling fan Up to 60 %
Minimum layer height 0.1 mm