Data Sheet

PLA - Technical information including:
Mechanical properties
Typical valueT est method
MFR 210°C/2,16 kg9 ,56 gr/10 min ISO 1133
Tensile strength at yield 70 Mpa ISO 527
Strain at yield 5 %I SO 527
Strain at break 20 % ISO 527
Tensile Modulus 3120 MPa ISO 527
3.4 kJ/m ISO 179
Moisture absorption1 968 ppm ISO 62
Thermal properties
Typical valueT est method
Melting temp. 115±35°CI SO 11357
Vicat softening temp.6 0 °C ISO 306
Glass transition temp. 57 ºCI SO 11357
Diameter Ø 2.85 mm
Max roundness deviation
750 g
1,24 g/cm
Printing settings
Extruder temperature1 90 °C - 220 °C
Bed temperature 65 °C
Speed 10-70 mm/s
Retraction speed 40 mm/s
Retraction distance 4 mm
Cooling fan Yes
Minimum layer height 0.05 mm