User`s guide

7
DO NOT remove the plastic tab.
Figure 2.2-2 Inserting the battery
Remember to switch the power off before removing the battery.
Step 1. With the the phone face down, slide the battery cover off of the phone.
Step 2. Pull the plastic tab on the battery base to easily remove the battery.
Figure 2.2-3 Removing the battery
2.3. Charging the WLAN600
Step 1. Connect the AC adaptor included in the package (use only this adaptor) to the
charger. Plug the lead from the adaptor into the circular jack on the bottom of the
power charger.
Figure 2.3-1 Connecting the power cord
Step 2. Plug the AC adapter into a standard wall outlet.
Plastic Tab
8
Figure 2.3-2 Plugging-in the charger
Step 3. Place the phone on the charger. WLAN600 automatically turns on.
Step 4. The battery-strength indicator on the right side of the display will scroll.
12:00
WLAN600
Not Registered
Menu Names
Figure 2.3-3 Battery-strength Indicator
Charge the battery for five hours before using your WLAN600.
Figure 2.3-4 Charging the battery
Step 1.
The battery-strength indicator stops scrolling when when the battery is fully
charged.
Step 2. Remove the phone from the charger.