User`s guide

39
5. Basic Phone Tasks
5.1. Dialing a Phone Number
1. In idle state, enter a phone number by using the numerical keys.
2. If you have entered an incorrect number, press the
key to delete it.
3. Press the
key to connect your call.
5.2. Redialing a Phone Number
1. In idle state, press the key.
The list of placed calls is displayed.
2. Scroll through the list by using the
S
or
T
key.
Press the
key to make the call.
5.3. Answering a Call
To answer a call, press the key.
To reject a call, press the key.
40
6. Display Messages
6.1. Error Messages
Error messages are displayed to let you know that an error has occurred. These
error messages may prevent you from connecting to the network or from using the
phone. You may need to contact the system administrator to resolve the problem.
Error 1
: No AP found ( blinking)
The ESSID set on the phone does not match any of the Service
Set Identifiers (SSIDs) of the AP in the network.
Error 2: Net Fail! (DHCP)
The phone failed to obtain the IP address from the DHCP
server, or failed to authenticate due to a Wep Key error.
Error 3
: Net Fail! (PPPoE)
The phone failed to obtain the IP address from your ISP
service.
Error 4
: Registering to SIP proxy failed
The phone failed to register with the SIP Proxy.
It could be due to the WEP key or SIP proxy setting error.
Please contact your service provider, or check your SIP
Settings.
12:00
WLAN600-user
Not Registered
Menu Names
12:00
WLAN600-user
Net Fail! (DHCP)
Menu Names
12:00
WLAN600-user
Net Fail! (PPPoE)
Menu Names
12:00
WLAN600-user
Not Registered
Menu Names