Operating Instructions

WB200 Health Watch Components
Health Watch - Battery Charging
Display Mode
PTT - Systolic & Diastolic Measurement
SpO2 Measurement
LED Display
Front Light Sensor
Touchpad
Wristband:
All Health Watch straps consist
of waterproof velcro for ease of
wear and comfort
USB Charger
USB Wall
Adapter
21:42
Align the metal pins
on the charger to
the main console
rear pin holes.
Note: When battery is low, a blank screen or depleted
battery icon will show on the display. Please charge your
wristband immediately. 30 mins for full charge lasts
typically 3.5 days.
Secure console
while battery is
being charged.
When charging is
complete, current
time mode will be
displayed.
Step 1:
Step 1:
Step 2:
Tap touchpad five times to locate the
SpO2 option on LED display.
Tap touchpad four times to locate the Systolic &
Diastolic option on LED display.
Step 2:
Hold touchpad down with index finger for four
seconds until finger pointing on LED display
begins. Lift finger and gently rest it over the front
light sensor located right above the touchpad
with no pressure applied for roughly 30-45
seconds. You will see a green and red light
which indicates the health watch is processing.
Do not lift your finger off the sensor until health
watch vibrates and results appear.
Hold touchpad down with index finger for four
seconds until finger pointing on LED display
begins. Lift finger and gently rest it over the front
light sensor located right above the touchpad
with no pressure applied for roughly 30-45
seconds. You will see a green and red light
which indicates the health watch is processing.
Do not lift your finger off the sensor until health
watch vibrates and results appears.
Note: If the LED Display shows an error, please
repeat the steps above again. This means your
health watch needs additional calibration. After
the health watch is calibrated, future results will
appear after one measurement.
Watch Face
Vitals
BlueTooth ID
Pairing
Temperature
ECG
PTT Systolic &
Diastolic
HRV
Heart Rate
SPO2
Fall Detection
Low Battery