User`s manual

SQ575
1 Introduction
1.1 Overview
The SQ575 mainboard integrates the Pentium microprocessor, memory, and I/O technologies
and is designed to fit into a standard AT form factor chassis. The design supports Pentium
processors, Pentium processors with MMX technology, Cyrix 6X86/6X86L/M2 Processors,
and AMD K5/K6 Processors. Page 2-2 illustrates the mechanical form factor for the SQ575
mainboard.
1.2 How to use this Manual
This manual provides information necessary to install and operate the SQ575 mainboard and
is organized into four chapters. The purpose of this manual is to explain the installation
procedures and operations of the mainboard as specified below.
1. Introduction Manual information and checklist
2. Key Features An overview specification of this mainboard
3. Installation Instructions on how to setup the mainboard
4. BIOS setup BIOS software setup information
1.3 Item Checklist
The SQ575 mainboard should contain following items (ü). Immediately, contact your retailer
if you discover any missing items, or any damage.
_ The SQ575 mainboard
_ This SQ575 user‘s manual
_ 1 IDE ribbon cable
_ 1 floppy ribbon cable
_ 1 parallel ribbbon cable attached to a mounting bracket
_ 2 serial ribbbon cable attached to a mounting bracket
_ 1 PS/2 cable with bracket (optional)
_ USB (2 port) cable with bracket (optional)
_ Infrared (IrDA) module with ribbon cable (optional)