User`s manual

SQ575
2
3.1.2 Setting 3-pin jumpers
Jumper Pins 1 & 2 are closed with a jumper cap
Jumper Pins 2 & 3 are closed with a jumper cap
3.1.3 Setting 2-pin jumpers
This jumper is closed with the jumper cap placed over 2 pins
This jumper is open with the jumper cap removed from the 2 pins
WARNING: Some pins are used for connectors or power sources. These are clearly marked
separately from the jumpers listed in “Mainboard Layout”. Any improper placing of jumper
caps over these connectors will result in damage to your mainboard
3.1.4 Configuration Jumpers
Jumpers
1) JP13, JP14, JP15, JP16, JP6, JP7 Processor voltage selection
2) JP4, JP5, JP10, JP9, JP8 Processor/System speed setting
The Jumper located As below:
3.1.5 Processor Voltage Setting (JP6, JP7, JP13, JP14, JP15 &
JP16)
The Pentium P55C, Cyrix 6x86L/M2 and AMD-K6 processors have various voltage choices
depending on the CPU speed and the bin grade. These jumpers provide a way to select the
different types of voltage .
Processor Voltage JP6 JP7 JP13 JP14 JP15 JP16
V
CORE
=3.5V
V
I/O
=3.5V