User manual

SySTIUM
®
TECHNOLOGIES MOTHERBOARD READY
SM
SYSTEM • MODEL 526
Copyright © 2010, Systium® Technologies, LLC
PN: 91588-00
I/O Shield
The RadiSys PL35Q motherboard uses the RadiSys I/O
shield supplied with the motherboard. Refer to the main
assembly guide for instructions on installing the I/O shield.
Installing the Motherboard
STANDOFF INSTALLATION
1. Install the standoff, (if required) included in the
chassis integration kit, in location 0 as shown in
the figure below.
HEATSINK INSTALLATION
1. Install the CPU fan heatsink per instructions
provided with the Intel Box set.
2. Connect the heatsink fan power cable to the
motherboard.
Installation of front panel connectors
Connect Peripheral Cables
Refer to the Model 526 Assembly Guide for the suggested
peripheral cable routing.
RadiSys PL35Q ASSEMBLY INSTRUCTIONS
Stand Off