User manual

SySTIUM

TECHNOLOGIES MotherBoard Ready

System • MODEL 526

PN: 91171-05 Rev 01

Radio Frequency Interference Notice (USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to

operate the equipment. The customer is responsible for ensuring compliance of the modified product.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC class B limits may be

attached to this computer product. Operation with noncompliant peripherals is likely to result in interference to radio and

TV reception.

All cables used to connect to peripherals must be shielded and grounded. Operation with cables, connected to

peripherals that are not shielded and grounded may result in interference to radio and TV reception.

Manufacturer: Systium® Technologies, LLC

New Hope, MN

763-537-3600

Contact: Customer Support

NOTE

If a Class A device is installed within this system; then the system is to be considered a Class A system. In this

configuration, operation of this equipment in a residential area is likely to cause harmful interference.

Radio Frequency Interference Notice (CDN)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de Ia classe B est conforme a Ia norme NMB-003 du Canada.

Declaration of the Manufacturer or Importer

This system is compliant with Low Voltage Directive 2006/95/EC using the standard EN60950-1:2006+A11, 2

Ed.,

(IEC60950-1:2005).

This system is compliant with EU directive 2004/108/EC using the standards EN55022 and EN55024-1.

Disclaimer Statement

Systium® Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. Systium Technologies assumes no

responsibility for any errors that may appear in this document. Systium Technologies makes no commitment to update

nor to keep current the information contained in this document. No part of this document may be copied or reproduced

in any form or by any means without prior written consent of Systium Technologies.

† Third-party brands and trademarks are the property of their respective owners.