User`s manual

- 39 -
Installation
4.9.3 S3 Video Init
Perform S3 initialization during S3 (STR) resume.
4.9.4 Stand- by Timer
Set system inactivity time period before BIOS enters the system into stand-by state
in APM mode.
4.9.5 Suspend Timer
Set system inactivity time period before BIOS enters the system into suspend state in
APM mode.
4.9.6 Hard Disk Power Down
Set system inactivity time period before BIOS shutdown IDE drive in APM mode.
4.9.7 Video Off
Set system inactivity time period before BIOS turn off video in APM mode.
4.9.8 Power Button
In case of computer being “hung”: Instant-Off allows the power button to shut down
the system instantly by the push of the button; Delay 4 Sec. allows the power button
to shut down the system after holding the button for 4 seconds.
4.9.9 MODEM Uses IRQ
Determines which IRQ the MODEM can use. The choices are: 3, 4, 5, 7, 9, 10, 11, and
N/A.
4.9.10 PWRON After PWR-Fail
Sets PWRON After PWR-Fail as Last State, on, or off.