User`s manual

RX61H User’s Manual
RX61H User’s Manual
57
2.4.6.3 Parallel Port Configuration
Set parameters of parallel port (LPT/LPTE)
Parallel Port Configuration
 Parallel Port [Enable]
Enable or Disable parallel port
Configuration options: [Disabled] [Enabled]
 Device Setting [IO=378h; IRQ=7]
 Change Setting [Auto]
Select an optimal setting for Super IO device.
Configuration options: [Auto] [IO=378h; IRQ=7] [IO=378h; IRQ=5, 6, 7, 9. 10, 11, 12]
[IO=278h; IRQ=5, 6, 7, 9. 10, 11, 12] [IO=3BCh; IRQ=5, 6, 7, 9. 10, 11, 12]
 Device Mode [Auto]
Change the printer port mode
Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7
and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]