User`s manual

RX61H User’s Manual
36 RX61H User’s Manual
1.8.2 CPU and System fan connectors (FAN 1, FAN2, FAN 3)
The fan connectors support cooling fans of 280mA (3.36 W max.) at 4800rpm or a total of
1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of the
connector.
Note: FAN1 – CPU Fan; FAN2 – System Fan; FAN3 – Chassis Fan
Do not forget to connect the fan cables to the
fan connectors. Insufficient air flow inside the
system may damage the motherboard
components.
These are not jumpers! DO NOT place jumper
caps on the fan connectors.