User`s manual

RX45Q User’s Manual
65
2.2.11 Set Password
You can set password. Supervisor Password: able to enter/change the options of setup menus.
Follow these steps to change the password.
Choose the “Set Password” option from the “Initial Setup Screen” menu and press <Enter>. The screen
displays the following message:
Please Enter Your Password
Press <Enter>.
If the CMOS is good and this option has been used to change the default password, the user is asked
for the password stored in the CMOS. The screen displays the following message:
Please Confirm Your Password
Type the current password and press <Enter>.
After pressing <Enter> (ROM password) or the current password (user-defined), you can change the
password stored in the CMOS. The password must be no longer than eight (8) characters. Remember,
to enable the password setting feature, you must first select either “Setup” or “System” from the
“Advanced BIOS Features” menu.