User`s manual

RX45Q User’s Manual

2.2.4.3 Super I/O Device

 Power ON Function

This feature allows you to wake up the system using any of the listed options. The selections are “Hot KEY”,

“Mouse Left”, “Mouse Right”, “Any KEY” and “BUTTON ONLY”.

 KB Power ON Password

Select this item to set or change the KB power on password.

 Hot Key Power ON

Awaken the system by pressing the hot key button. The choices are “Ctrl-F1”, “Ctrl-F2”, “Ctrl-F3” to “Ctrl-F8”.

 Onboard FDC Controller

When enabled, this field allows you to connect your floppy disk drives to the onboard floppy disk drive

connector instead of a separate controller card. If you want to use a different controller card to connect the

floppy disk drives, set this field to Disabled.

 Onboard Serial Port

The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”, “Disabled” and “Auto” for the on-board

serial connector.

 RxD, TxD Active

The options: [Hi, Hi,], [Hi, Lo], [Lo, Hi], [Lo, Lo]

 Power After PWR-Fail

Use this to set up the system after power failure. The “Off” setting keeps the system powered off after power

failure, the “On” setting boots up the system after failure, and the “Former-Sts” returns the system to the

status before power failure.