User`s manual

RX45Q User’s Manual

4. Lift the load plate with your thumb and forefinger to a

100º angle (A), then push the PnP cap from the load

plate window to remove (B).

5. Position the CPU over the socket, making sure that

the gold triangle is on the bottom-left corner of the

socket then fit the socket alignment key into the CPU

notch.

6. Close the load plate (A), then push the load lever (B)

until it snaps into the retention tab.

7. If installing a CPU, connect the chassis fan cable to

the CPU_FAN1 connector to ensure system stability.

The CPU fits in only one correct orientation. DO NOT force the CPU into the socket

to prevent bending the connectors on the socket and damaging the CPU!

The motherboard supports Intel® LGA775 processors with the Intel® Enhanced

Memory 64 Technology (EM64T), Enhanced Intel SpeedStep® Technology (EIST),

and Hyper-Threading Technology.

After installation, make sure to plug-in the ATX power cable to the motherboard.