User`s manual

hardware components turn off to save energy. The information stored in memory will be used to

restore the system when a “wake up” event occurs.

• Suspend Time Out (Minute)

If system activity is not detected for the length of time specified in this field, all devices except CPU will be

shut off.

• Power Button Function

This feature sets the function of the power button. Settings are:

[Power Off] The power button functions as normal power off button.

[Suspend] When you press the power button, the computer enters the suspend/sleep mode, but

if the button is pressed for more than four seconds, the computer is turned off.

• Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt occurs. Settins are:

[Off] Always leaves the computer in the power off state.

[On] Always leaves the computer in the power on state.

[Last State] Restores the system to the status before power failure or interrupt occurred.

• Wakeup Event Setup

Press <Enter> and the following sub-menu appears:

• Resume From S3 By USB Device

The item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM)

sleep state.

• Resume From S3 By PS/2 Keyboard

This setting determines whether the system will be awakened from what power saving modes when

input signal of the PS/2 keyboard is detected.