User manual
MotherBoard Ready
SM
System • MODEL 526EX
Power up the System
1. Connect the keyboard, mouse, monitor and any other
required peripheral for the correct operation of the
computer. Refer to the Model Guide for assistance in
connecting the peripherals to the computer.
2. Turn on the computer by pressing the power switch on the
front panel. Refer to the Quick Start Section of this manual
for more information.
3. Verify the operation of the POWER ON indicator on the front
panel. The LED should glow constantly when the computer is
turned on. Verify that the floppy LED turns on when the
system resets the floppy drive during the POST. Verify the
operation of the hard drive LED on the front panel. The LED
should turn on when the POST resets the hard drive or
attempts to boot the computer. Correct any problems
detected during the initial power up phase.
4. Test the complete operation of the computer using a known
good computer functional test program such as Intel’s Test
view. Install any required operating system or application
software.
NOTE
The computer must have all the required warning and information
lights functioning before shipping to the end user.
5. Disconnect the computer from the peripherals used during
the testing phase. Package the computer using the original
packaging.
NOTE
You must include the End User Quick Start manual in the shipment to
the customer to maintain Regulatory Compliance.
Copyright © 2013, Systium® Technologies, LLC
PN: 91173-00 Rev 00