User manual
Copyright © 2013, SySTIUM® Technologies, LLC
PN: 91608-00 Rev00
1
MODEL 526EX MAINTAINING REGULATORY COMPLIANCE
WARNING
Read and adhere to all of these instructions supplied for the Model 526EX system. Failure to follow these instructions will result in voiding the
product’s regulatory compliance statements. Note that the computer system may be noncompliant with other regional product laws and
regulations.
Critical Components: To maintain the Model 526EX CSA listing and Model 526EX compliance to other regulatory certifications and/or declarations the
following Critical Components must be used.
The Model 526EX product is a Critical Component. The SySTIUM® Model 526EX must be used without modification to the cooling fans or the chassis
enclosure. The power supplies listed below are included with the Model 526EX. Any Model 526EX power supply substitution or modification will
invalidate the Model 526EX regulatory compliance.
One of the motherboards listed in the table below must be used with the Model 526EX. Use of any other motherboard will invalidate the Model 526EX
regulatory compliance. The integrator must use the heat sink listed as required to ensure regulatory compliance. The table below was constructed using
a CPU no greater than 95W TDP. Using a higher wattage CPU will invalidate the Model 526EX regulatory compliance.
MFG
Motherboard
Notes
Power Supplies
Heat Sink Required
All CPU’s to:
Intel
DG41TY
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.33 GHz
Intel
DH55TC
ST-450SFX
Intel Supplied
3.4GHz
Intel
DQ67SW
ST-450SFX
SySTIUM 10312-25
3.4GHz
Intel
DQ77MK
ST-450SFX
SySTIUM 10312-25
3.4GHz
Advantech
AIMB-580
ST-450SFX
SySTIUM 10312-25
3.4GHz
Advantech
AIMB-567
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
BCM
RX35Q
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
BCM
RX965QV
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.8GHz
BCM
RX45Q
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
BCM
RX67Q
ST-450SFX
SySTIUM 10312-25
3.4GHz
ITOX
BL330-BR
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
ITOX
EL330-DR
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
ITOX
MB330-CRM
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
ITOX
MB331-CRM
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
ITOX
SB330-CRM
ST-450SFX
SySTIUM 10304-00C
or 10312-25
3.4GHz
Optional Components: In addition to the required Critical Components listed above Optional Components may be integrated by the
assembler/integrator. Optional Components include peripherals (HDD, SSD, optical drives, etc.) and add in /add-on adapters (PCI, PCI-e, USB
devices, etc.). The assembler/integrator assumes responsibility for ensuring the Optional Components meet Model 526EX regulatory compliance.
ADAPTERS The Model 526EX is designed to support only half-length PCI or PCI-e adapters. Installed adapters must be CSA, UL or
TUV Listed or Recognized, FCC Class B compliant and CE Marked.
PERIPHERALS Installed peripherals must be CSA, UL or TUV Listed or Recognized, FCC Class B compliant and CE Marked.
NOTE: If a Class A device is installed within this system, then the system is considered a Class A system with respect to the FCC and CE
certification.