User manual

SySTIUM

TECHNOLOGIES MOTHERBOARD READY

SYSTEM • MODEL 526EX

I/O Shield

The Intel DQ77MK motherboard uses the Intel I/O shield

supplied with the motherboard. Refer to the main

assembly guide for instructions on installing the I/O shield.

Installing the Motherboard

STANDOFF INSTALLATION

1. Install the standoff, included in the chassis

integration kit, in location 0 as shown below.

HEATSINK INSTALLATION

1. Install the CPU fan heatsink per instructions

provided with the Intel Box set.

2. Connect the heatsink fan power cable to the

motherboard.

3. Turn the motherboard over while holding the

support bracket in place. Place the new heat

sink mount on the motherboard. Attach the heat

sink using the 4 built-in screws.

4. Connect the heat sink fan power cable to the

motherboard.

Installation of front panel connectors

INTEL DQ77MK ASSEMBLY INSTRUCTIONS

526EX DQ77MK AI Rev 1.0