User manual

SySTIUM

TECHNOLOGIES MOTHERBOARD READY

SYSTEM • MODEL 526EX

I/O Shield

The BCM RX35Q motherboard uses the BCM I/O shield

supplied with the motherboard. Refer to the main

assembly guide for instructions on installing the I/O shield.

Installing the Motherboard

STANDOFF INSTALLATION

1. Install the standoff, (if required) included in the

chassis integration kit, in location 0 as shown in

the figure below.

HEATSINK INSTALLATION

1. Install the CPU fan heatsink per instructions

provided with the Intel Box set.

2. Connect the heatsink fan power cable to the

motherboard.

Installation of front panel connectors

Connect Peripheral Cables

Refer to the Model 526E Assembly Guide for the

suggested peripheral cable routing.

BCM RX35Q ASSEMBLY INSTRUCTIONS

526EX RX35Q AI Rev 1.0