User manual

SySTIUM

TECHNOLOGIES MOTHERBOARD READY

SYSTEM • MODEL 526EX

I/O Shield

The Advantech AIMB-580 motherboard uses the

Advantech I/O shield supplied with the motherboard. Refer

to the main assembly guide for instructions on installing

the I/O shield.

Installing the Motherboard

STANDOFF INSTALLATION

1. Install the standoff, (if required) included in the

chassis integration kit, in location 0 as shown in

the figure below.

HEATSINK INSTALLATION

1. Install the CPU fan heatsink per instructions

provided with the Intel Box set.

2. Connect the heatsink fan power cable to the

motherboard.

Installation of front panel connectors

Connect Peripheral Cables

Refer to the Model 526 Assembly Guide for the suggested

peripheral cable routing.

Advantech AIMB-580 ASSEMBLY INSTRUCTIONS

Stand Off

526EX AIMB-580 AI Rev 1.0