User manual

SySTIUM
®
TECHNOLOGIES MOTHERBOARD READY
SM
SYSTEM • MODEL 526EX
I/O Shield
The Advantech AIMB-567 motherboard uses the
Advantech I/O shield supplied with the motherboard. Refer
to the main assembly guide for instructions on installing
the I/O shield.
Installing the Motherboard
STANDOFF INSTALLATION
1. Install the standoff, (if required) included in the
chassis integration kit, in location 0 as shown in
the figure below.
HEATSINK INSTALLATION
1. Install the CPU fan heatsink per instructions
provided with the Intel Box set.
2. Connect the heatsink fan power cable to the
motherboard.
Installation of front panel connectors
Connect Peripheral Cables
Refer to the Model 526 Assembly Guide for the suggested
peripheral cable routing.
Advantech AIMB-567 ASSEMBLY INSTRUCTIONS
Copyright © 2013, Systium® Technologies, LLC
526EX AIMB-567 AI Rev 1.0