User`s manual

4. BIOS SETUP

4.9 Supervisor Password

4.10 User Password

When you select this function, a message appears at the center of the screen:

ENTER PASSWORD:

Type the password, up to eight characters, and press Enter. Typing a password clears

any previously entered password from CMOS memory. Now the message changes:

CONFIRM PASSWARD:

Again, type the password and press Enter.

To abort the process at any time, press Esc.

In the Security Option item in the BIOS Features Setup screen select System or Setup:

System : Enter a password each time the system boots and whenever you enter Setup.

Setup : Enter a password whenever you enter Setup.

NOTE: To clear the password, simply press Enter when asked to enter a password.

Then the password function is disabled.

4.11 IDE HDD Auto Detection

BIOS setup will display all possible modes that supported by the HDD including

NORMAL, LBA & LARGE.

If HDD does not support LBA modes, no ‘LBA” option will be shown.

If no of cylinders is less than or equal to 1024, no “LARGE” option will be show

Users can select a mode, which is appropriate for them.