User`s manual

56
4. BIOS SETUP
4.8 Integrated peripherals Menu
4.8.1 OnChip IDE Channel0
The chipset contains a PCI IDE interface with support for two IDE channels. Select
Enabled to activate the primary IDE interface. Select Disabled to deactivate this
interface.
4.8.2 OnChip IDE Channel1
The chipset contains a PCI IDE interface with support for two IDE channels. Select
Enabled to activate the primary IDE interface. Select Disabled to deactivate this
interface.
4.8.3 IDE Prefetch Mode
The onboard IDE drive interfaces supports IDE prefetching, for faster drive accesses. If
you install a primary and/or secondary add-in IDE interface., set this field to Disabled
if the interface does not support prefetching. The choices: Enabled, Disabled.
4.8.4 Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input / Output) fields let you set a PIO mode (0-4) for
each of the four IDE devices that the onboard IDE interface supports.
ROM PCI/ISA BIOS (2A5KKG5C)
INTEGRATED PERIPHERALS SETUP
AWARD SOFTWARE, INC.
Move to items
Exit to Main
Menu
Modify values
Enter Sub-Menu
: Enabled
: Enabled
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: PCI Slot
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: IrDA
: Hi, Lo
: Enabled
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
EPP Mode Select
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PI0
Primary Slave PI0
Secondary Master PI0
Secondary Slave PI0
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Init Display First
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
RxD, TxD Active
IR Transmission delay
:
:
: 1
: EPP1.9
Figure 7: Integrated Peripherals setup Menu