User`s manual

ManualsBrandsBCM ManualsComputer equipmentQS440VA

4. BIOS SETUP

4.6 Power Management Setup Menu

4.6.1 ACPI function

The choices are Enabled and Disabled. This item allows you to enable/disable the

Advanced Configuration and Power Management (ACPI).

4.6.2 Power Management

This option allows you to select the type (or degree) of power saving for Doze,

Standby, and Suspend modes. See the section PM Timers for a brief description of each

mode. This table describes each power management mode:

Disable Global Power Management will be disabled

Max Saving

Maximum power savings. Only Available for SL CPUs. Inactivity

period is 1 minute in each mode.

User Define

Set each mode individually. Select time-out periods in the PM Timers

section, following.

Min Saving Minimum power savings. Inactivity period is 1 hour in each mode

(except the hard drive).

ROM PCI/ISA BIOS (2A5KKG5C)

POWER MANAGEMENT SETUP

AWARD SOFTWARE, INC.

Esc : Quit

↑→←↓

: Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old value (Shift) F2 : Color

F7 : Load Setup Defaults

Move to items

Exit to Main

Modify values

Enter Sub-Menu

: Enabled

: User Define

: No

: Always On

: blank Screen

: NA

: Delay 4 Sec

: Disabled

: OFF

: NONE

: OFF

: Disabled

Primary INTR

IRQ3 (COM 2)

IRQ4 (COM 1)

IRQ5 (LPT 2)

IRQ6 (Floppy Disk)

IRQ7 (LPT 1)

IRQ8 (RTC Alarm)

IRQ9 (IRQ2 Redir)

IRQ10 (Reserved)

IRQ11 (Reserved)

IRQ12 (PS/2 Mouse)

IRQ13 (Coprocessor)

IRQ14 (Hard Disk)

IRQ15 (Reserved)

ACPI Function

Power Management

PM Control by APM

Video Off Option

Video Off Method

MODEM Use IRQ

Soft-Off by PWRBTN

**PM Timers**

HDD Power Down

Doze Mode

Suspend Mode

**PM Events**

VGA

LPT & COM

HDD & FDD

DMA/master

Wake Up On LAN

Modem Ring Resume

RTC Alarm Resume

: ON

: Disabled

Figure 5: Power Management Setup Menu